Welcome to IATC.IN

Note -

Training schedules & Courses Fees etc for all courses & batches listed above are subject to General Terms / conditions attached in this same file.
HOLIDAYS within the course period will be informed to the participant along with the respective course confirmations.
Few of the courses (especially courses with 8 days or 10 days) may have Sat/Sun closed.
DISCOUNT IS APPLICABLE TO CUSTOMERS CONFIRMING MORE THAN ONE PARTICIPANTS (IN THE SAME BATCH):
a. FOR 2 - 3 PARTICIPANTS WE WILL BE OFFERING 5 % DISCOUNT ON ABOVE.
b. FOR 4 - 7 PARTICIPANTS WE WILL BE OFFERING 10 % DISCOUNT ON ABOVE.
c. FOR 8 PARTICIPANTS & ABOVE, WE WILL BE OFFER DISCOUNTS ON CASE TO CASE BASIS (SINCE IT WILL BE AN INDEPENDENT BATCH).
COLLEGE COURSES CAN BE CONDUCTED AT AUTHORIZED TRAINING CENTRE ALSO (BUT THE COMPLETE TECHNO COMMERCIAL FORMALITIES TO BE DONE THROUGH SITRAIN, Kalwa)

Student Training April 2010 to December 2010
Training Area	Duration	Schedule
PLC- Programmable Logic Controller (S7-200 / S7-300)	Six Weeks	24.05.'10 to 02.07.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	24.05.'10 to 02.07.'10 T ime: 14:00 - 17:00 hrs.
	Six Weeks	14.06.'10 to 23.07.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	21.06.'10 to 30.07.'10 Time: 14:00 - 17:00 hrs.
	Six Weeks	05.07.'10 to 06.08.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	04.10.'10 to 12.11.'10 Time: 10:00 - 13:00 hrs.
AC- DC Drives	Six Weeks	14.06.'10 to 23.07.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	12.07.'10 to 20.08.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	04.10.'10 to 12.11.'10 Time: 10:00 - 13:00 hrs.
CNC - Computer Numerical Controller	Six Weeks	24.05.'10 to 02.07.'10 Time: 10:00 - 13:00 hrs.
	Six Weeks	12.07.'10 to 20.08.'10 Time: 10:00 - 13:00 hrs.
Integrated Automation Training (covering PLC, AC/DC Drives, SCADA/ HMI and Project)	Six Months	05.07.'10 to December 2010 Time: 10:00 - 13:00 hrs.
	Six Months	19.07.'10 to December 2010 Time: 14:00 - 17:00 hrs.
Note : Students are advised to check / reconfirm with Administrative Coordinator of the Centre, about the conduct of the course(s). Registration should be get done at least one week before the commencement of the course.

Fee Structure for Courses offered by IATC (for students of engineering institutions)
Sr.No	Name of the Course	Duration	Fee (INR) per trainee
1	Certificate Course on PLC Application and Programming	4 - 6 weeks	6,000/-
2	Certificate Course on AC-DC Drive	4 - 6 weeks	6,000/-
3	Certificate Course on Introduction to CNC	4 - 6 weeks	6,000/-
4	Certificate Course on SCADA	02 weeks	5,000/-
5	Certificate Course on HMI	01 week (05 days)	2,500/-
6	Certificate Course on Switchgear Application	04 weeks	6,000/-
7	Certificate Course on Auto-CAD	04 weeks	6,000/-
8	Certificate Course on Industrial Automation	12 weeks (P-T)	10,000/-
9	Industrial Automation Training (for job-seekers)	06 weeks(F-T)	15,000/-

In addition to the above facilities are available for

six months industrial training of students, the successful completion of which entitles them to “Certificate of Competence in Mechatronics ”. Those who work on live projects, will get separate experience certificate provided by IATC. The fee for this course is Rs. 18,000/= per trainee
one-week exposure courses, on any of the above areas [Sr. No. 01 to 04 ], for which the course fee is Rs.1,000/= per trainee.

Notes :

For institutions desirous of having exclusive training courses organized for their students, the minimum batch size to be paid for is 10.
A special discount of 10 % would be offered to institutions sponsoring 5 or more students for a specific course.
Women students and students belonging to SC/ST/OBCs would also be entitled to a special discount of 10 %.
Discount can be availed of only under one of the above categories. Clubbing of discounts under different categories is not allowed. The above course fee is exclusive of Service Tax which will be levied at the rate prevailing at the time of the course.

For further information/ clarification, the Director of the Centre may be contacted at 0172-5044416 or iatc@iagauto.com

Fee Structure for Courses offered by IATC (for working professionals from industry)
Sr.No	Name of the Course	Duration	Fee [INR] per trainee for IATC- SIEMENS Courses*
1	PLC : SIMATIC S7-200	05 days	15,000/-
2	PLC : TIA Basic with SIMATIC S7-300*	08 days	24,000/-
3	Basic AC Drives with MM4 Maintenance*	05 days	15,000/-
4	AC Drive : Masterdrives Vector Control*	06 days	18,000/-
5	SIMATIC WinCC (SCADA)*	05 days	18,000/-
6	DC Drive : SIMOREG DC Master 6RA70*	06 days	18,000/-
7	SIMATIC HMI Panels*	03 days	9,550/-
8	*Sinumerik 802 D, Turning, Operating and Programming**	05 days	7,000/-
9	Sinumerik 802 D* Maintenance and Commissioning	05 days	10,000/-
10	CNC, PLCs and Drives (An introductory course for technicians)	06 days	7,500/-
11	CNC – Part Programming (for supervisory level)	05 days	10,000/-
Courses at Sr. No.10, 11, 12 are exclusive to IATC
For schedule and other information in respect of courses at Sr. No. 01 to 07, please refer SITRAIN TRAINING CALENDAR

Notes:

For industry / organizations desirous of having exclusive training courses organized for their personnel, the minimum batch size to be paid for is 10.
The above course fee is exclusive of Service Tax which will be levied at the rate prevailing at the time of the course.
Payment is to remitted in advance by means of a demand draft / payable at par cheque drawn in favour of “Siemens Limited”, payable at Mumbai.
* Certification is by Siemens
For further information/ clarification, the Director of the Centre may be contacted at 0172-5044416 or iatc@iagauto.com

Special discounts are offered in case of groups of 5-10 students being sponsored by an institute. For more details about schedules, discount, please seek desired information by mailing the enquiry / suggestion form for the purpose, from this site.

Web Media Management: Pramarsh